Muzzle Brake Information
The information below can help you choose which brake is right for you and help you understand the process
Standard Brake
A straightforward brake that comes in three or four ports and multiple outer diameters. These brakes provide a sleek look, and tapering them to match the diameter of your barrel is included in the price.
These brakes come at a lower cost, but usually require a trip to your local gunsmith or machinist to finish timing them, which is a required step to align the threads so that the ports are properly aligned when the brake is attached to your barrel
Self Timing Brake
This brake comes with a lock nut. It comes at a higher price due to the extra machining that is required, but because it does not need to be timed by a gunsmith or machinist, it can be timed at home.
If your barrel is already threaded this is a great option because you can just align the ports, tighten the lock nut, and you are ready to shoot.
Measuring Your Barrel
To accurately taper a standard brake to match your barrel a precise measurement of your barrel is required.
Measure a barrel that is not yet threaded 5/8" from the end of the barrel and a threaded barrel at the shoulder just before the threads.
Caliber and Bullet Diameter
There are hundreds of calibers in use today and often the cartridge name does not give the exact diameter, but most share just a few diameters of bullet. Here is a chart that can help you find the exact diameter of the bullet for your caliber. If you have trouble finding the answer here, don't hesitate to contact us.
Measure Bullet Diameter Here